Vigor300B Series User’s Guide
3
C
C
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
s
s
Interface Description
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
LAN1/2 (Giga) Connecters for local networked devices.
WAN1/2/3/4
(Giga)
Connecters for remote networked devices.
USB1/2 Connecter for Mobile HDD, 3G Modem or printer.
Connecter for a power cord.
ON/OFF - Power switch.
To Next Page
Loading...
