Vigor300B Series User’s Guide
38
z If you choose DHCP-IA_NA as IPv6 protocol type, click the DHCPV6 Tab to open
the following page:
Available parameters are listed as follows:
Item Description
DHCP (IA_NA)
Gateway Address
Type the gateway IP address for IPv6 DHCP IA_NA mode.
DHCP (IA_NA)
DNS Address
Add – Click this button to type primary DNS server address
for IPv6.
Save – Click this button to save the setting.
– Click the icon to remove the selected entry.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
To Next Page
Loading...
