Client Drayton File Name 75 42 Dr ayt on LP 10R F & DIG IS TAT+2 RF 06 515 08 600 1 ISS C
Artworker -
Proof Stage
PRINT
Finished Size A5 148x210mm
Creative Director Mike Lane Artwork % 100%
Modification Date 21/08/15 2:56PM Bleed 3mm
User Guide LP10RF Programmer & Receiver
Repeat operations 3 to 6 to set the second and third ON/
OFF times.
NOTE:
After pressing set? for the third OFF time, SET
SAT are displayed. If you do not require individual
weekend times, then press set? until the normal
display is resumed.
Setting SAT - SUN:
1.
Press OK to select weekend.
2.
Press + or - to change the ON time.
3.
Press set? to set the ON time and select the OFF
time.
4.
Press + or - to change the OFF time.
5.
Press set? to set the OFF time and select the next
ON time.
PROG?
SAT SUN
NOTE:
Speed up the display by holding down the + or -
buttons.
Repeat operations 3 to 6 to set the second and third ON/
OFF times.
NOTE:
After pressing set? for the third hot water pre-heat
off time for SAT, the display will show SET SUN. Press
OK to set SUN or press set? until the display returns
to normal mode.
Setting individual weekend days:
NOTE:
If you do not require individual weekend day times,
then press set? until the normal display is shown.
If you do not wish to change the settings for SAT, then
press set? to move to SUN.
Setting individual weekend days:
1.
Press OK to select the day displayed.
2.
Press + or - to change the ON time.
3.
Press set? to set the ON time and select the OFF
time.
4.
Press + or - to change the OFF time.
5.
Press set? to set the OFF time and select the next
ON time.
PROG?
SAT SUN
To Next Page