16
Care & Maintenance
Tips:
• Turn off the appliance before maintenance. Do not touch the power switch.
• Replace parts if needed. The parts must be replaced by those available from the
manufacturer or its service agent.
• If the vacuum is not used for an extended period, fully charge it, unplug the
power plug, and store the vacuum in a cool, low-humidity environment away
from direct sunlight. To avoid over-discharge of the battery, charge the vacuum
at least once every 3 months.
Cleaning the Used Water Tank and the Filter
1. Press the Used Water Tank release
button and pull the Used Water Tank
outwards to remove it.
2. Take out the filter from the Used
Water Tank cover. Remove the tank
cover and empty the tank.
3. Rinse the Used Water Tank and the
tank cover with clean water. Clean the
tank by the provided cleaning brush.
4. Re-install the filter and the Used Water
Tank cover. Then re-install the Used
Water Tank until you hear a click.
Note:
• If the filter is dirty, rinse it with clean water and dry it completely before use.
• Replacing the filter every 3 to 6 months is recommended.
To Next Page
Loading...
