7
Optional DashDAQ Accessories
DashDAQ Accessory Cable
10-pin accessory cable for analog and
serial connection. Allows for up to two 0-
5 volt sensors and other third party data
collection devices.
SD Memory Card.
For data logging on DashDAQ. Order the
SD Memory card directly from Drew
Technologies or a DashDAQ dealer.
110 V Power Supply
Power the DashDAQ outside of your in
the comfort of your home or office.
CAN Expansion Cable
8-pin CAN expansion cable is useful
when hard-wiring to CAN, J1850, or
ISO9141 connections such as stand-alone
EFI systems without an OBD2 plug and
CAN-based sensors.
GPS Receiver
The GPS receiver allows users to collect
GPS data right alongside any other input
DashDAQ can monitor. Speed, latitude,
longitude, and altitude are just a few of
the parameters available.
To Next Page
Loading...