Drive 15571 - Inspection; Storage

13
15561FR Competitor II Manual Height Adjust Bed w/Full Rail, 1/cs
15561HF Competitor II Manual Adjustment Bed Ends, 1/PR
15565FM Competitor II Head/Foot Frame w/MTR, 1/EA
15561FRAIL Competitor II Full Rail ONLY, 1/PR
15561HR Competitor II Manual Height Adjust Bed w/Half Rail, 1/cs
15561HF Competitor II Manual Adjustment Bed Ends, 1/PR
15565FM Competitor II Head/Foot Frame w/MTR, 1/EA
15561HRAIL Competitor II Half Rail ONLY, 1/PR
INSPECTION
1. Examine each component carefully for damage, scratches, dents or any other visual damage.
2. Carefully remove Tie Wraps holding power cord, hand pendant and drive shaft.
3. Inspect power cord and plug for cuts or damage.
4. Inspect the motors for damage, loose connections, cuts or damage to the wires.
5. Ensure motor connection to pendant are connected correctly and secure.
STORAGE
1. If the bed is not assembled immediately, retain cartons and packaging for storage until assembly is completed.
2. Store the packaged bed in a dry area.
3. DO NOT place other objects on top of the packaged bed cartons.