03
98
Ease of use and comfort
Rear seats
Bench seat with fixed one-piece cushion and split backrests (1/3 - 2/3) which can be folded individually to adapt the load space in the boot.
F Move the corresponding front seat forward
if necessary.
F Position the seat belt between the outer
and centre head restraints to avoid
trapping the belt when repositioning the
seat backrest.
F Place the head restraints in the low
position.
Folding the backrest
F Pull control 1 forwards to release the seat
back 2.
F Straighten the seat back 2 and secure it.
F Check that the red indicator, located next to
the control 1, is no longer visible.
F Put the seat belt back in place on the side
of the seat backrest.
Repositioning the seat backrest
When repositioning the seat backrest,
take care not to trap the seat belts.
F Fold the seat back 2 on to the cushion.
To Next Page
Loading...
Need help?
General
