07
246
Practical information
Power steering fluid
level
The power steering fluid level should
be close to the "MAX" mark. With
the engine cold, unscrew the cap to
check the level.
Brake fluid level
Changing the uid
Refer to the manufacturer's service schedule
for details of the interval for this operation.
Fluid speciîš¿cation
The brake fluid must conform to the
manufacturer's recommendations.
The brake fluid level should be close
to the "MAX" mark. If it is not, check
the brake pad wear.
Topping up the engine oil level
The location of the oil filler cap is shown in the
corresponding underbonnet layout view.
F Unscrew the oil filler cap to reveal the filler
aperture.
F Add oil in small quantities, avoiding any
spills on engine components (risk of fire).
F Wait a few minutes before checking the
level again using the dipstick.
F Add more oil if necessary.
F After checking the level, carefully refit the
oil filler cap and the dipstick in its tube.
After topping up the oil, the check when
switching on the ignition with the oil level
indicator in the instrument panel is not valid
during the 30 minutes after topping up.
Engine oil change
Refer to the manufacturer's service schedule
for details of the interval for this operation.
In order to maintain the reliability of the engine
and emission control system, never use
additives in the engine oil.
To Next Page
Loading...
Need help?
General
