02
85
Acc ess
Deactivate the interior volumetric and anti-tilt
monitoring to avoid unwanted triggering of the
alarm in certain cases such as:
- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your vehicle,
- changing a wheel,
- having your vehicle towed,
- transport by sea.
Locking the vehicle with exterior perimeter monitoring only
F Switch off the ignition and within
ten seconds, press the button until the
indicator lamp is on continuously.
F Get out of the vehicle.
F Immediately lock the vehicle using the
remote control or the Keyless Entry and
Starting system.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second.
To be effective, this deactivation must
be carried out each time the ignition is
switched off.
Reactivating the interior volumetric
and anti-tilt monitoring
F Deactivate the perimeter monitoring by
unlocking the vehicle with the remote
control or the Keyless Entry and Starting
system.
The indicator lamp in the button goes off.
F Reactivate all monitoring by locking the
vehicle with the remote control or the
Keyless Entry and Starting system.
The indicator lamp in the button flashes
once per second again.
Deactivating the interior volumetric
and anti-tilt monitoring
To Next Page
Loading...
Need help?
General
