07
248
Practical information
To check the level or top up the
fluid on vehicle fitted with headlamp
washers, immobilise the vehicle and
switch of the engine.
Screenwash / headlamp wash fluid level
F Open the bonnet and secure it with the
stay.
Specication of the uid
To ensure optimum cleaning and to avoid
freezing, the fluid should never be topped up or
replaced by plain water.
In wintry conditions, the use of a fluid
with an ethyl alcohol or methanol base is
recommended.
F Open the screenwash reservoir filler cap.
F Take and pinch the level gauge to block its
breather.
F Remove the gauge completely from
the reservoir to read the level in the
transparent section.
F Top up if necessary.
F Refit the filler cap to the reservoir and
close the bonnet.
To Next Page
Loading...
Need help?
General
