08
268
In the event of a breakdown
F Turn the sealant cartridge and secure it in
the cut-out provided on the compressor.
F Check that the compressor switch is at
the "O" position.
F Uncoil fully the electric cable, stowed under
the compressor.
F Remove the valve cap from the tyre to be
repaired, and place it in a clean area.
F Connect the hose from the sealant
cartridge to the valve of the tyre to be
repaired and tighten firmly.
F Connect the compressor's plug to the
vehicle's 12 V socket.
F Switch on the ignition.
To Next Page
Loading...
