DS Automobiles DS 4 User Manual

08
282
In the event of a breakdown
F Remove the protective cover by pulling
the tab.
F Disconnect the connector.
F Spread the springs to release the bulb.
F Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
When refitting, close the protective
cover carefully to preserve the sealing
of the headlamp.
F Remove the protective cover by pulling
the tab.
F Disconnect the connector.
F Squeeze the springs to release the bulb.
F Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
F Remove the protective cover by pulling
the tab.
F Disconnect the connector.
F Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
Changing dipped beam headlamp
bulbs (on models with halogen
headlamps)
Changing main beam headlamp
bulbs (on models with type 1
halogen headlamps)
Changing main beam headlamp
bulbs (on models with type 2
halogen headlamps)

DS Automobiles DS 4 Specifications

General

Brand	DS Automobiles
Model	DS 4
Category	Automobile
Language	English