01
50
Instruments
F Press the "7" or "8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK" button to confirm.
Choice of language
Once this menu has been selected, you can
choose the language used by the display from
a pre-defined list.
Display conguration
This menu gives access to the following
settings:
- "Choice of units",
- "Date and time adjustment",
- "Display parameters",
- "Brightness".
F Press the "5" or "6" buttons, then the
"OK" button to select the "OK" box and
confirm or press the "Back" button to
cancel.
As a safety measure, configuration of
the multifunction screen by the driver
must only be done when stationary.
Adjusting the date and time
F Press the "7" or "8" button to display the
"Display configuration" menu, then press
"OK".
F Press the "5" or "6" button to select the
"Date and time adjustment" button, then
press "OK".
F Press the "7" or "8" button to select the
setting to modify. Confirm by pressing
"OK", then modify the setting and confirm
again to save the modification.
F Adjust the settings one by one, confirming
with the "OK" button.
F Press the "5" or "6" button, then the "OK"
button to select the "OK" box and confirm
or the "Back" button to cancel.