Communicator Programming
Worksheets
System Options
[001] Ethernet IP Address
Default (000.000.000.000)
[002] Ethernet IP Subnet Mask
Default (255.255.255.000)
[003] Ethernet Gateway IP Address
Default (000.000.000.000)
[005] System Toggle Options
[3] Supervision Type (OFF).
[4] Primary Communications Path.
[OFF] TL2803G(R)E; TL280LE(R)
[ON] 3G2080(R)E; LE2080(R).
Future Use
[6] Remote Firmware Upgrade (ON).
[7] Alternate TestTransmission (OFF).
[8] Cellular Low Signal Trouble (OFF).
[006] System Toggle Options 2
[7] DLS Over Cellular (ON).
[8] Network Trouble Suppression (OFF).
[007] Primary Ethernet DNS IP
Default (000.000.000.000)
[008] Backup Ethernet DNS IP
Default (000.000.000.000)
[009] Language
Default (01); Program label language 01-29
OPT Language OPT Language OPT Language
01 English 11 Swedish 21 Russian
02 Spanish 12 Norwegian 22 Bulgarian
03 Portuguese 13 Danish 23 Latvian
04 French 14 Hebrew 24 Lithuanian
05 Italian 15 Greek 25 Ukrainian
06 Dutch 16 Turkish 26 Slovakian
07 Polish 17 Chinese 27 Serbian
08 Czech 18 Croatian 28 Estonian
09 Finnish 19 Hungarian 29 Slovenian
10 German 20 Romanian 30-99 Reserved
Programming Options
[010] System Toggle Options 3
[1] 2-Way Audio Over Cellular (OFF)
[2] Visual Verification Default (OFF).
[3] Video On Demand (OFF)
[4] Receiver Group (OFF)
[5] Radio not in use (OFF)
[011] Installer Code
Default (CAFE) Valid range: 0000 - FFFF.
[012] DLS Incoming Port
Default (0BF6/3062) Valid range: 0000 - FFFF.
[013] DLS Outgoing Port
Default (0BFA/3066) Valid range: 0000 - FFFF.
[015] DLS Call-Up IP
Default (000.000.000.000)
[016] DLS Call-Up Port
Default (0000) Valid range: 0000 - FFFF.
[018] Receiver Group Programming
Default (0000) Valid range: 0000 - FFFF.
[019] Network Profile Selection*
Default 00. Valid range 01 - 05
[1] Telstra
[2] Vodafone
[3] KDDI
[4] Softbank
[5] NTT Docomo (default)
*Australia/New Zealand only
[020] Time Zone
Default (00) Valid range:00 - 99.
52
To Next Page
Loading...
Need help?
General
