DSC LE2080 User Manual

[114] Ethernet Receiver 2 UDP Remote Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
[115] Ethernet Receiver 2 UDP Local Port
Default (0BF9/3065) Valid range: 0000 -FFFF.
[116] Ethernet Receiver 2 Domain Name
Default ( ) 32 ASCII characters.
[117] Ethernet Receiver 2 Supervision Interval
Default (0087/135 seconds)
Valid Range: 000A-FFFF
____________________________________
Ethernet Options
[124] Ethernet Test Transmission Time
Default (9999) Valid: 00-23(HH); 00-59(MM)
[125] Ethernet Test Transmission Cycle
Default (000000)
Valid range:000000 - 999999 minutes.
Cellular Receiver 1 Options
[200] Cellular Receiver 1 Enabled
[1] – Ethernet Receiver 2 Enable (DefaultOn)
[2] – Cellular Receiver 1 Supervision Enable (Default
Off)
[201] Cellular Receiver 1 Account Code
Default (0000000000)
Valid range:0000000001 - FFFFFFFFFE.
[202] Cellular Receiver 1 DNIS
Default (000000) Valid range: 000000 - 0FFFFF.
[203] Cellular Receiver 1 Address
Default (000.000.000.000)
[204] Cellular Receiver 1 Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
[205] Cellular Receiver 1 APN
32 ASCII characters.
____________________________________
[206] Cellular Receiver 1 Domain Name
32 ASCII characters.
[207] Cellular Receiver 1 Supervision Interval
Default (0087/135 seconds) Valid Range: 000A-FFFF
____________________________________
Cellular Receiver 2 Options
[210] Cellular Receiver 2 Enabled
[1] – Cellular Receiver 2 Enable (Default On)
[2] – Cellular Receiver 2 Supervision Enable (Default
Off)
[211] Cellular Receiver 2 Account Code
Default (0000000000)
Valid range:0000000001 - FFFFFFFFFE.
[212] Cellular Receiver 2 DNIS
Default (000000)
Valid range:000000 - 0FFFFF.
[213] Cellular Receiver 2 Address
Default (000.000.000.000)
[214] Cellular Receiver 2 Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
[215] Cellular Receiver 2 APN
Default ( ) 32 ASCII characters.
____________________________________
[216] Cellular Receiver 2 Domain Name
Default ( ) 32 ASCII characters.
[217] Cellular Receiver 2 Supervision Interval
Default (0087/135 seconds)
Valid Range 000A – FFFF
____________________________________
Cellular Options
[221] Cellular Public Access Point Name
Default ( ) 32 ASCII characters
____________________________________
[222] Cellular Login User Name
Default ( ) 32 ASCII characters.
____________________________________
[223] Cellular Login Password
Default ( ) 32 ASCII characters.
____________________________________
[224] Cellular Test Transmission Time of Day
Default (9999)
Valid range:00 - 23 hrs. (HH) 00 - 59 min. (MM).
[225] Cellular Test Transmission Cycle
Default (000000)
Valid range:000000 - 999999 minutes.
[226] Network Trouble Delay
Default (0F)
Valid entries from 00 to FF.
54

DSC LE2080 Specifications

General

Brand	DSC
Model	LE2080
Category	Security System
Language	English