EasyManuals Logo

DSC LE2080 User Manual

DSC LE2080
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
[227] Voice Call Timeout
Default (00)
Valid entries from 00 to FF.
[228] Voice Call Back Time
Default (0A)
Valid entries from 00 to FF.
[229] Voice Call Back Number
________________________________________
[237] Primary Cellular DNS IP
Default (000.000.000.000)
[238] Backup Cellular DNS IP
Default (000.000.000.000)
Command and Control Options
[301] Command and Control Toggle Options
[1] SMS Notification (ON)
[2] Serial Communication Port enabled (OFF)
[3] SMS Command and Control Default(ON)
[4] Interactive (OFF)
[5] SMS Character Format (OFF)
[6] Long SMS Message Handling Default (OFF)
[7] Reserved
[8] Reserved
[308] Outgoing SMS Retry Attempts
Default (19) Valid entries from, 00 to FF.
[309] Outgoing SMS Retry Counter
Default (000F) Valid entry: 0000 - FFFF.
[311]-[342] SMS Phone Number 1-32
______________________________________________
[343]-[374] SMS Phone Number 1-32 Toggle
Options
[1] SMS Notification Alarm/Restore Default (ON).
[2] SMS Notification Tamper/Restore Default (ON)
[3] SMS Notification Opening/Closing Default (ON)
[4] SMS Notification System Maintenance Default (ON)
[5] SMS Notification System Test Default (ON)
[6] SMS Notification Internal Events Default (ON).
[7] SMS Notification Enabled Default (ON).
[8] SMS Command and Control Enabled Default (ON)
[375]-[406] SMS Phone Number 1-32 Partition
Assignment
Default (00) Valid range:00 - FF.
00 - Global; 01-32 - Partition; FF - Disabled
[420] Serial Port Baud Rate ('R' models only)
Default (05)
01=9600 Baud; 02=19200 Baud; 03=38400 Baud;
04=57600 Baud; 05=115200 Baud
[421] Serial Port Settings ('R' models only)
[1] Parity Enabled (OFF)
[2] Parity Type (OFF-Even Parity)
[3] 2 Stop Bit s (OFF-1 Stop Bit)
[4] Flow Control (OFF)
[422] Integration Identification Number
[423] Session 1 Integration Access Code
Default (12345678) Valid range: 00000000 - FFFFFFFF
[424] Session 1 SMS Label
Default (11111111)
______________________________________________
[425] Session 1 Integration Toggle Options 2
[1] Integration Over Serial Port (ON)
[2] Integration Over Cellular (OFF)
[3] Integration Over Ethernet (OFF)
[4] Type 2 Encryption (OFF)
[5] Integration Protocol (ON)
[6] Interactive Protocol SMA (OFF)
[7] Reserved
[8] Interactive Encryption for SMA (ON)
[426] Session 1 Integration Toggle Options 3
[1] UDP Polling (OFF)
[2] TCP Polling (OFF)
[3] Real-time Notification (OFF)
[4] Notification Follows Poll (OFF)
[5] Reserved
[6] Reserved
[7] Reserved
[8] Reserved
[427] Session 1 Interactive Polling Interval
Default (000A) Valid range: 0000 - FFFF seconds.
[428] Session 1 Integration Server IP
Default (000.000.000.000)
[429] Session 1 Integration Notification Port
Default (0C00/3072) Valid range: 0000 - FFFF.
55

Table of Contents

Other manuals for DSC LE2080

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC LE2080 and is the answer not in the manual?

DSC LE2080 Specifications

General IconGeneral
BrandDSC
ModelLE2080
CategorySecurity System
LanguageEnglish

Related product manuals