DSC PC2585 - Page 49

45
[32] System Clock Times
Page 32
Default
9 9 9 9 Automatic Arming Time of Day
9 9 9 9 Automatic Disarming Time of Day
9 9 9 9 Test Transmission Time of Day
Enter 4 digits: 00 to 23 hours, 00 to 59 minutes. If a function is not used, leave at the factory default settings.
[33] Master Code
Page 32
Default
1234
[34] Second Master Code
Page 32
Default
AAAA
[35] Installer’s Code
Page 32
Default
2585
[36] Bypass Mask, Zones 1 - 8
Page 33
If a Zone Light is ON, that zone may be bypassed using the [Q][1] Bypass command.
Default
ON Zone 1
ON Zone 2
ON Zone 3
ON Zone 4
ON Zone 5
ON Zone 6
ON Zone 7
ON Zone 8
[37] Access Code Bypass Mask, Access Codes 1 - 8
Page 33
If a light is ON, then that Access Code may be used to bypass zones. If an Access Code is not required to
bypass zones, programming in this section will not affect system operation. The Access Code
Required for Bypass option is programmed in Section [23] Zone Light 4.
Default
ON Access Code 1
ON Access Code 2
ON Access Code 3
ON Access Code 4
ON Access Code 5
ON Access Code 6
ON Access Code 7
ON Access Code 8
PC2585 v 1.1R