48
[45] Double Call Timer
Page 34
Default
0 6 0 Enter a 3-digit time, in seconds, from 0 to 255.
[46] Panel Identification Code
Page 34
Default
2581
[47] Downloading Access Code
Page 34
Default
2505
[48] Downloading Telephone Number
Page 35
[49] Printer Configuration
Page 35
Default Zone Light ON Zone Light OFF
OFF Zone Light 1 110 baud Not 110 baud
OFF Zone Light 2 300 baud Not 300 baud
ON Zone Light 3 1200 baud Not 1200 baud
OFF Zone Light 4 Printer only Printer and normal communication
OFF Zone Light 5 See note Printer and normal communication
OFF Zone Light 6 RTS: PIN 4 or DTR: PIN 20 SRTS: PIN 11
OFF Zone Light 7
For future use For future use
OFF Zone Light 8
For future use For future use
NOTES:
If Zone Light 5 is ON and Zone Light 4 is OFF: All items whose reporting codes are programmed for Communications
Buffer 1 will be communicated to the monitoring station AND printed on the printer. All items whose reporting codes are
programmed for Communications Buffer 2 will NOT be communicated to the monitoring station but will be printed on the
printer.
If Zone Lights 4 and 5 are OFF: All items whose reporting codes are programmed for Communications Buffer 1 or 2 will
be printed on the printer and communicated to the monitoring station.
If Zone Light 4 is ON:
All items whose reporting codes are programmed for Communications Buffer 1 or 2 will be printed
on the printer but will not be communicated to the monitoring station. In this case it is assumed that telephone lines are
not connected. DO NOT disable the communicator. The First System Option Code, Zone Light [1] must be OFF. To avoid
TLM trouble, program Second System Option Code Zone Light [1] to be ON.
NOTE: In order to properly program the baud rate, only
one
zone light - either 1, 2 or 3 - should be ON.
[50] Printer Language Option
Page 35
Default
0 3 Enter: 00 for English
01 for French
02 for Dutch
03 for German
[89] Print Event Buffer
Page 35
[90] Installer Lockout Enable
Page 36
Enter: [90][Installer’s Code]
[91] Installer Lockout Disable
Page 36
Enter: [91][Installer’s Code]
[99] Factory Default
Page 36
Enter: [99][Installer’s Code]
PC2585 v
1.1R
To Next Page
Loading...
