What does it mean when green LEDs are alternating on DSC Cell Phone?
If the green LEDs are alternating on your DSC Cell Phone, it could indicate a radio reset or radio initialization. If this status persists and the yellow LED shows 5 flashes, confirm that the SIM card is active.
Why are only green LEDs flashing on my DSC Cell Phone?
If only the green LEDs are flashing on your DSC Cell Phone, the hardware default jumper is installed and must be removed. See Figure 3.
What does it mean when the yellow LED flashes 7 times on my DSC Cell Phone?
If the yellow LED flashes 7 times on your DSC Cell Phone, the receiver might not be available. Ensure that the Ethernet path has Internet connectivity. If using a static IP address, confirm that the gateway and subnet mask are entered correctly. If the network has a firewall, ensure the network has the programmed outgoing ports open (default UDP port 3060 and port 3065). Ensure that all the receivers are programmed for DHCP or have the proper IP address and port number. Ensure the cellular receiver APNs have been programmed with the access point name provided by your cellular provider. If Common Mode is used, and only one path is initialized while the other path is not successful, generate a manual test transmission over both paths or power cycle the communicator to recover the ‘Receiver N...
General| Network Technology | GSM / HSPA |
|---|---|
| 2G bands | GSM 850 / 900 / 1800 / 1900 |
| GPRS | Yes |
| EDGE | Yes |
| SIM | Mini-SIM |
| Video | Yes |
| Secondary | No |
| Alert types | Vibration; MP3, WAV ringtones |
| Loudspeaker | Yes |
| 3.5mm jack | Yes |
| Speed | HSPA |
| Type | TFT touchscreen |
| Resolution | 240 x 400 pixels |
| Card slot | microSD |
| Bluetooth | v2.1, A2DP |
| Radio | FM radio |
| USB | microUSB v2.0 |
| Messaging | SMS, MMS, Email |
| Browser | WAP 2.0/xHTML |
| Battery | Li-Ion battery |
| Colors | Black, White |
To Next Page
