Dual XDCPA10BT User Manual

21
XDCPA10BT INSTALLATION
Rear RCA Input
Rear Camera Operation - (Optional)
Connect an optional audio/video source into the RCA (rear) input.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to the wiring diagram for details.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Note: The external video output is not active when using the rear camera input.
A/V IN
Using Rear Camera
Auto Selection

Dual XDCPA10BT Specifications

General

Bluetooth	Yes
Touchscreen	Yes
USB Ports	1
Backup Camera Input	Yes
Apple CarPlay	No
Android Auto	Yes
Peak Power Output	50 watts x 4 channels
Power Output	50 watts x 4 channels
Auxiliary Input	Yes
Display Type	LCD
Remote Control	Yes
Screen Size	10.1 inches
Preamp Outputs	3 pairs (Front, Rear, Subwoofer)
RMS Power Output	16 watts
RCA Preamp Outputs	3 pairs (Front, Rear, Subwoofer)