Dual XDCPA10BT User Manual

24
XDCPA10BT INSTALLATION
Specifications
FM Tuner
AM Tuner
Front USB
Monitor
General
Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 10dBf
50dB quieting sensitivity: 20dBf
Stereo separation @ 1kHz: 38dB
Frequency response: 30Hz-13kHz
Tuning range: 530kHz-1710kHz
Usable sensitivity: 24uV
Frequency response: 30Hz-2.3kHz
Compatibility: High Speed USB 2.0
USB Class: Mass storage class
Panel size: 7” diagonal measurement
View angle (up/down/left/right): 50/70/70/70
Resolution: 1024 (H) x 600 (V)
Brightness (cd/m
2
): 500
Contrast ratio: 500:1
Pixels: 1,152,000
Speaker output impedance: 4 ohms
Line output voltage: 2 volt RMS
Line output impedance: 200 ohms
Chassis dimensions: 7" x 5" x 4" (W x D x H)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)

Dual XDCPA10BT Specifications

General

Bluetooth	Yes
Touchscreen	Yes
USB Ports	1
Backup Camera Input	Yes
Apple CarPlay	No
Android Auto	Yes
Peak Power Output	50 watts x 4 channels
Power Output	50 watts x 4 channels
Auxiliary Input	Yes
Display Type	LCD
Remote Control	Yes
Screen Size	10.1 inches
Preamp Outputs	3 pairs (Front, Rear, Subwoofer)
RMS Power Output	16 watts
RCA Preamp Outputs	3 pairs (Front, Rear, Subwoofer)