Engine Coolant temperature
This function describes the operation of engine
coolant indicator.
Temperature unit of measurement can be selected
(°C or °F).
Value is indicated as follows:
- if value ranges between -39°C and +39°C (-38°F
and +102°F) "LO" will be displayed steady on
instrument panel;
- if value ranges between +40°C and +120°C
(+104°F and +248°F) value will be displayed
steady on instrument panel;
- if value is equal to or higher than +121°C (+250°F)
"HI" will be displayed flashing on instrument
panel.
Note
If the sensor is in fault, the three flashing dashes
("- - -") will be displayed and, at the same time, the
"Engine/Vehicle Diagnosis - EOBD" light will come on.
Fig. 12
35
To Next Page
Loading...
