To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the
"MENU 2" function and press the reset button (4) to
shift to next page.
Function status is highlighted on the display (green if
ON or yellow if OFF).
Use buttons (1) or (2) to move left arrow on the new
setting, and press the reset button (4) to confirm it.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
4
4
1 2
4
4
1
2
RIDING MODE RPM
MENU
BATTERY ABS
MENU 2 PIN CODE CLOCK DDA
BACK LIGHT LAP SET UNITS EXIT
MENU 2
ON
OFF
EXIT
MENU 2
ON
OFF
EXIT
MENU 2
ON
OFF
EXIT
MENU 2
ON
OFF
EXIT
Fig. 50
94