Ducati MONSTER 695 - Page 447

Clutch unit: clutch cover
Remove the circlip (11) and withdraw the shim (10) and the seal (9).
The drilled bush (8) is an interference fit in the cover. Remove with a suitable puller.
Visually inspect the seal (9) and replace as required.
Remove the plug (15) and its O-ring (14), the engine oil pressure switch (21) and its seal (20) from the cover.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_6B9_00.68.1.html (4 of 8) [10/7/2008 8:45:59 PM]