Ducati MONSTER 695 - Page 448

Clutch unit: clutch cover
Reassembling the clutch cover
Fit the plug (15) and the seal (14). Install the pressure switch (21) and the seal (20).
When fitting a new bush (8), drive it fully home into the clutch cover seat using a press and a suitable drift.
Position the sound-deadening panel (6) inside the clutch cover (1) as shown in the figure.
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_N_6B9_00.68.1.html (5 of 8) [10/7/2008 8:45:59 PM]