Removing the starter motor
Remove generator cover (Sect. N 8,
Removing the generator cover).
In the event the whole starting gear unit needs replacing, remove timing intermediate gears and
starter motor intermediate gear (Sect. N 9.1,
Removing the starter motor driven gear).
Disconnect starter motor / starter contactor cable (3) (see diagram in "
Arrangement of wiring on
frame" under Sect. P 1).
Undo retaining screws (1).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_P_3_9_00.80.1.html (3 of 6) [10/7/2008 8:47:02 PM]
To Next Page
