30
E
Front brake lever (fig. 20)
Pull the lever (1) towards the twistgrip to operate the
front brake. The system is hydraulically assisted and you
only need to pull the lever gently.
The brake lever has a wheel (2) for adjusting the distance
between lever and twistgrip on the handlebar.
To make the adjustment, keep the lever (1) fully forward and
turn the wheel (2) to one of the four preset positions.
Note that:
position n° 1 corresponds to the maximum distance
between the lever and grip, while position n° 4
corresponds to the minimum distance.
Warning
Any adjustment of brake levers must be carried
out when motorcycle is stationary.
1
fig. 20
2
3
4
1
2
To Next Page