62
E
Checking the brake pads for wear (fig. 54)
The brake pads are marked with wear indicators so that they
can be checked without removing them from the calipers.
If the grooves in the friction material are still visible, the
pad is still in good condition.
The rear brake pads must be replaced when about 1 mm
of friction lining (fig. 55) is still visible through the opening
in the calipers.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Workshop.
MIN
fig. 54
1 mm
fig. 55
To Next Page
Loading...
