72
E
Changing the front turn indicator bulbs
The front turn signals are integrated in the rear view mirrors.
To replace the bulb, unscrew the screw (1) and remove
the lens (2) of the indicator from the mirror (fig. 71).
The bulb (3) is of the bayonet-type: press and twist anti-
clockwise to remove. Replace the burned out bulb with a
new one of the same rating. Press the bulb in and twist
clockwise until it clicks into place (fig. 72).
Refit the lens (2) into the slot in the indicator body so
that their profiles coincide.
Secure the lens with the screw (1).
2
1
fig. 71
3
fig. 72
To Next Page
Loading...
