71
E
Remove the old bulb (10) and fit the new one, taking care not
to touch the glass (fig. 69).
Parking light
Disconnect the wiring connectors (11) from the terminals
(fig. 70).
Remove the side light bulb (12) from its holder and fit a
new one of the same type.
Refitting the bulbs
After changing the bulbs, reconnect the wiring connectors
to the light terminals. Reposition the headlight cover in its
location, taking care to line up the profiles, and secure it
to the headlight body by tightening the retaining clips.
Notes
It is possible to invert the wires to the bulb terminals.
10
fig. 69
11
12
fig. 70
To Next Page
Loading...
