73
E
Changing the rear turn indicator bulbs
To change the rear turn indicator bulbs, rotate the indicator
body (1) by a quarter of a turn so that the lens is facing
upwards, and extract it from indicator support (fig. 73).
The bulb (2, fig. 74) is of the bayonet type: push it in and
turn it anti-clockwise to remove it. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the indicator
body (1) to its support and rotate it by a quarter of a turn.
1
1
fig. 73
1
2
fig. 74
To Next Page
Loading...
