EasyManua.ls Logo

Ducati MULTISTRADA 1100 - Pannier Fitting Guide

Ducati MULTISTRADA 1100
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
E
Before refitting the half fairing, make sure that the grommets
(3) and seal (4) are correctly fitted over the pin (5) on the
inside of the half fairing (fig. 50).
Fit the left side fairing, starting from the rear, engaging the
tank pins in the grommets (fig. 51).
Push on the side fairing at the pin (5) to engage the stop (2)
over the end of the pin.
Engage the front quick release fastener (1), pushing it in and
turning it 1/4 of a turn clockwise.
Panniers
The motorcycle has provision for fitting side panniers.
The pannier kit is available from the Ducati parts service.
As well as all the parts necessary for fitting, the kit
also contains an instruction booklet.
3
4
5
fig. 50
fig. 51

Table of Contents