Key-On can only occur in the presence of one of the
two keys (3) or (4) or using the pin code. Key-Off can
also occur without a key (3) or (4). Key-Off occurs
when the speed of the motorcycle is equal to zero,
pressing the button (6) on the handlebar or by
pressing the Hands free button (7); at a speed other
than zero, only by pressing the Hands free button (7).
Note
When the battery is discharged, the active key
(3) acts like a passive key (4). The instrument panel
displays the discharged battery status.
The mechanical part (A) of the key (3) is used to open
the fuel cap and the seat and bag lock. The metal part
(A) of the key (3) remains hidden inside its housing, it
exits by pressing the button (B).
Fig. 91
Note
With the vehicle in Key-On and “engine off”, if
the presence of the active key (3) is not detected for
thirty consecutive seconds, the motorcycle will turn
off automatically without any action by the rider.
140
To Next Page