Warning indication (Alarms/Signals)
The instrument panel shows some signals/
malfunctions in real time on the round “Dot-Matrix”
display (B) that are not dangerous for correct vehicle
operation.
At Key-On (at the end of the check) one or more
“warnings” are displayed if they are active.
If a “warning” is activated during operation, the
current indication on the round “Dot-Matrix” display
(B) will switch automatically to the indicator.
If there are multiple indicators, they will scroll
automatically every 3 seconds.
Note
No signal lights turn on if one or more
“warnings” are activated.
Fig. 19
42
To Next Page