Instrument panel backlighting setting
function
This function adjusts the instrument panel
backlighting intensity.
To display the function, enter the “setting” menu
page 72 and access the “B. LIGHT” page.
The information will be displayed as follows:
- the arrows indicate the setting currently in use;
- use buttons (1) and (2) to select the new setting;
- to store the new setting press the reset button
(4); the arrows will move on to the stored setting.
To exit, select “EXIT” and press the reset button (4).
"MAX" setting: storing this condition, the backlighting
is at maximum brightness.
"MID" setting: storing this condition, the backlighting
is reduced approximately 30% relative to maximum
brightness.
"MIN" setting: storing this condition, the backlighting
is reduced approximately 70% relative to maximum
brightness.
Note
In the event of an interruption of the power
supply from the battery, when power is restored at
the next Key-On, the backlighting will always be set
by default to maximum brightness.
91
To Next Page
Loading...
