Performance data
Maximum speed in any gear should be reached only
after a correct running-in period with the motorcycle
properly serviced at the recommended intervals.
Important
Failure to follow these instructions will release
Ducati Motor Holding S.p.A. from any liability for any
engine damage or shortened engine life.
Spark plugs
Make:
NGK
Type:
MAR10A-J
Fuel system
MITSUBISHI indirect electronic injection.
Oval throttle body (corresponding diameter): 56 mm
Injectors per cylinder: 1
Firing points per injector: 12
Fuel specifications: 95-98 RON.
Warning
The vehicle is only compatible with fuel having
a maximum content of ethanol of 10% (E10). Using
fuel with ethanol content over 10% is forbidden.
Using it could result in severe damage of the engine
and motorcycle components. Using fuel with ethanol
content over 10% will make the warranty null and
void.
Brakes
Separate-action anti-lock brake system operated by
hall-type sensors mounted to each wheel with phonic
wheel detection: ABS can be disabled.
FRONT
Semi-floating drilled twin-disc.
Braking material: steel.
Carrier material: aluminium
Disc diameter: 320 mm.
Hydraulically operated by a control lever on handlebar
right-hand side.
Brake calliper make: BREMBO.
Type: P4-32 pistons.
Friction material: TT 2172.
Master cylinder type: PR18/19.
REAR
235
To Next Page
Loading...
