"Trip 2" meter
This function shows the distance travelled since the
trip meter was last reset.
Holding button (1) pressed for 3 seconds when this
function is displayed resets the trip meter. When the
reading exceeds 999.9, distance travelled is reset and
the meter automatically starts counting from 0 again.
If the system measurement units are changed at any
moment, or if there is an interruption in the power
supply (Battery Off), the distance travelled is reset
and the count starts from zero (considering the newly
set unit of measurement).
For the Europe, Canada, France and Japan versions
the default unit is km, while for the UK and USA
versions the default unit is mi.
Fig. 16
39
To Next Page
Loading...
