“Setting” menu
This menu is used to set/enable some motorcycle
functions. Press button (2) to enter the “setting
menu”.
Note
Once this menu has been accessed, it is not
possible to scroll the functions on the main display
(A).
Important
For safety reasons, the setting menu can only
be accessed when motorcycle speed is lower than or
equal to 20 km/h. If this menu is open and the speed
of the motorcycle exceeds 20 km/h, the instrument
panel automatically exits the menu and returns to the
"main" display.
The setting menu contains the following "items”:
- EXIT;
- BATTERY;
- SETUP;
- B.LIGHT;
- LAP;
- RPM;
- CLOCK;
- PIN CODE;
- EXIT.
To exit the setting menu, use button (1) or button (2)
to select “EXIT” (present at the beginning and end of
the menu item list) and press the reset button (4).
72