Key-On/Key-Off using the pin code (immobilizer
release)
Key-On can be performed by pressing the button (7)
on the hands free lock (1Fig. 88) without the presence
of the keys (3Fig. 88) and (4Fig. 88) and entering the
pin code on the dashboard.
Key-Off can be performed by pressing the button (6)
on the handlebar / Hands Free key (7) / engine off no
key.
After each Key-Off, at the next Key-On if the key is
not present the pin code must be entered. The pin
code is entered by the customer when receiving the
motorcycle. The function is not enabled without the
pin code. When the Hands Free button is pressed (7)
the instrument panel activates the backlighting and
the round display to be able to enter the four digit pin
code. Entering the correct pin turns on the instrument
panel and enables engine starting. The pin must be
entered within 120 sec, after which a Key-Off occurs
automatically.
Fig. 97
145
To Next Page