To gain access to adjuster (3), remove rider seat and
cover (4) next to battery.
Adjuster (3) can now be accessed through battery
support opening. Turn adjusters (1,Fig. 126) and (3) or
knob (2,Fig. 126) clockwise to increase damping or
preload, loosen them to reduce it.
STANDARD setting; from the fully closed position
(clockwise) loosen:
adjuster (1) by 9 clicks;
knob (2) by 18 mm (max. 18 - min. 25 mm);
adjuster (3) by 1.5 clicks.
Warning
The shock absorber is filled with gas under
pressure and may cause severe damage if taken apart
by unskilled persons.
Fig. 128
Fig. 129
171
To Next Page