403-618-03 Infinity™ Series Servo Ultrasonic Press Systems User Manual
19
SECTION 3 | INSTALLATION
System Inputs/Outputs Signal Descripons on the J5 Connector
hps://documents.dukane.com/AppNote/AN533.pdf
Pin 1 (+22VDC)
Pin 2 (Power Ground)
P
Pin 3 (Remote Setup Selecon Bit 0 Input)
Pin 4 (Remote Setup Selecon Bit 1 Input)
Pin 5 (Remote Setup Selecon Bit 2 Input)
Pin 6 (Remote Setup Selecon Bit 3 Input)
Pin 7 (Remote Setup Selecon Bit 4 Input)
Pin 8 (System Latch Reset Input)
Pin 9 (Automaon Cycle Stop Input)
Pin 10 (Front Panel Lockout Input)
Pin 11 (Isolated Input Common)
This input common
output.
Pin 12 (Ultrasound Acvaon/ Cycle Start Input)
Pin 13 (Isolated Ultrasound Common)
Pin 14 (E-Stop Status Output)
Pin 15 Programmable Output Status J5 Pin 15 (Home)
Pin 16 Programmable Output Status J5 Pin 16 (Teaching)