SECTION 6 | OPERATION
403-618-03 Infinity™ Series Servo Ultrasonic Press Systems User Manual
76
Part Limits
One or more process characteriscs may be displayed for each part. Addionally, parts may be marked as bad or suspect by specifying
acceptable upper and lower process characterisc limits. ALL weld characteriscs for ALL weld cycles are always monitored and saved
in memory.
Display
Bad
set.
Suspect
can be set.
Bad + Suspect
STEP 13 - Scanning the Ultrasonic Stack
The Scan Stack
Enable Advanced Sengs check
AdvancedAdvanced Process Seng
at
hps://documents.dukane.com/AppNote/AN512.pdf
Figure 6-14 Stack Scan