403-618-03 Infinity™ Series Servo Ultrasonic Press Systems User Manual
87
SECTION 8 | ALARM MESSAGES
Alarm Code Alarm Message Explanation Solution
U232
Digital Linear Encoder
Error
motor hall sensors.
U233
1 Inputs
U234
2 Inputs
U235 Transducer Door Fault
U236
result during an Auto Sense procedure.
U237
-
ed Fault
U300
before Cycle Start
U301
before Cycle Start
Start.
U302
Cycle
at the end of the cycle.
U308 Generator or Press Not
Ready
Generator or Press is not ready.
If alarm persists, contact Dukane.
U400
U401
U402
U403
U404
U405
U406
U407
-
U410 Pre-trigger Overtravel
Alarm
of trigger is required to be less than 0.25 inches or 6.35
millimeters.
-
es or 19.05 millimeters.
U411 Part Detected Too Early
detected before reaching the Sensing Start
parts.
costly damage to servo actuator.
U413
-
ceeded