Dukane Infinity Series - Alarm Messages (Continued) and Solutions

SECTION 8 | ALARM MESSAGES
403-618-03 Infinity™ Series Servo Ultrasonic Press Systems User Manual
88
Alarm Code Alarm Message Explanation Solution
U414 





U415 

 
than 0.
U417 
Trigger


value.

Trigger.
U421 
Reached
 
Increase the force against the part.


U500  The servo press must complete the homing



U501 
Detected


has been detected.

U502 End of Cycle Signal
Detected

of Cycle, this alarm indicates that the signal
has been detected.

U504 

 
U505 Transducer Door Open 
door is open.
Reinstall transducer door before running sonics.