Duke READYFLEX RFDU 22 - Settings; Menu; Temp Mode; PHU Configurator

RFDU Operator’s Manual
10
SETTINGS
Several Settings are available on the RFDU. To enter the Settings menu click on the cog icon ( ) which is
found in the lower right hand corner of the runtime screen.
“Temp Mode” will display an option where the
temperature mode can be changed from the
default of Fahrenheit to Celsius.
NOTE: Any temperature throughout the control will
display in the selected temperature mode.
RFDU OPERATING INSTRUCTIONS  Continued
The “Menu” option is allows you to select the
number Menus (or dayparts) you want to be
available (1 to 3).
Menu
Temp Mode
PHU Congurator
When the user loads the “RFDU Cong” menu
option within Settings the following screen will
appear.
In the same way as the runtime screen the unit’s
conguration (for example 2X1) will be detected
and displayed.
The PHU cong option allows the recipe mapping
of each well to be modied for each menu.
When an individual well is pressed a list of available
recipes will appear available for selection within the
zone, for example: