Duke READYFLEX RFDU 22 - USB Programming

19
RFDU Operator’s Manual
RFDU OPERATING INSTRUCTIONS  Continued
The “SHOW LEGEND” button can also be used to
display the full recipe list for the full account.
When grid programming has been completed a
completely programmed PHU looks like the below.
After programming the wells two options are then
available. “DOWNLOAD PHU CONFIGURATION
FILE” will create a local RCP formatted le with the
programming. Alternatively, the “SAVE button” can
selected. This will update the well programming on
the unit instantly from the Sous Chef Cloud to the
RFDU unit itself. This is a real-time recipe program
update.
Another option available within the Sous Chef
Cloud is to be able to view the online RFDU Recipe
List. This is available by selecting “Recipes” under
“Equipment Dashboard” on the Sous Chef Cloud
side menu.
A list of local recipes found on the RFDU will appear
here.
These can be edited, added, or deleted using
the appropriate function which will update the
connected RFDU local recipe set in real-time.
Selecting “Create Recipe” will load the following
form where a new recipe can be added. Fields
between “add” and “edit” are the same.
Fields consist of Recipe Name, Bottom Temp, Top
Temp, Cook More enabled, Cook More Message ID,
Cook more time, enabled/disabled and lid enabled/
disabled. When nished adding or editing select the
“SAVE” button. The updated recipe list will be sent
to the connected RFDU where it is updated in real
time.
USB Programming
In some cases the connected RFDU unit may not be
online and connected to the Sous Chef Cloud. If this
is the case the RFDU recipe and programming set-
tings can be modied on the actual unit UI or alter-
natively the RFDU Oine Congurator menu option
can be used on the Sous Chef Cloud.
This can be found under “Recipe” menu on the side
menu of the Sous Chef Cloud.