Duke READYFLEX RFDU 22 - Sous Chel Technology Programming

RFDU Operator’s Manual
18
Sous Chef Technology Programming
The ReadyFlex™ Holding Unit can have its recipes
and well programming updated locally on the RFDU
Control as mentioned in previous sections. Recipes
and well programming can also be updated via
Duke’s cloud solution – the Sous Chef Cloud. The
Sous Chef Cloud requires the user’s Account Name
to be dened along with a user login and password.
This can be created via the Sous Chef Cloud
registration process without the assistance of Duke
Customer Service. An option exists for this purpose
on the souscheftech.com landing page – “Create an
Account”.
The ReadyFlex™ Holding Unit can then be added
to the account using its serial number and API key
which can be found on the unit itself.
After logging onto the Sous Chef Cloud all con-
nected devices within the account will be displayed.
Multiple RFDU’s are possible to be loaded within the
account.
RFDU OPERATING INSTRUCTIONS  Continued
After selecting the “Dashboard” icon to connect to a
specic RFDU the programming grid will appear. As
this is a connected unit the unit conguration will
be detected automatically, for example a 2x2 RFDU
conguration appears below.
The RFDU programming grid will be color coded per
zone. Recipes programmed within each zone will
be required to be of the same top temperature and
bottom temperature.
Three MENU’s are available for selection for each
well. The three menu’s may be used as BREAKFAST,
LUNCH or DINNER. The “All Day” option can be used
when the well holds the exact same recipe for the
entire day.
To program a well select the dropdown boxes next
to each MENU. A list of available recipes will be
displayed.