EasyManua.ls Logo

Dunlop DL240B+ - PICTOGRAMS AND SAFETY SIGNALS; INTENDED USE DEFINITION

Dunlop DL240B+
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
3.5 HAZARDOUS AREAS
Before using the lift, make sure that no unauthorized persons nor animals are present within the hazardous area delimited by the yellow stripe.
Persons or animals shall by no means stop or pass within the hazardous area delimited by the yellow stripe, when using lift even for small
movements, and whenever the Emergency Switch/OFF is not depressed.
Each lift is supplied with the identification plates relating to the different versions.
3.6 IDENTIFICATION OF THE LIFT AND DESCRIPTION OF PICTOGRAMS
The safety signals described in this manual are applied onto the lift (Fig. 6), and warn about unsafe and hazardous
situations. Decals shall be kept clean and, if detached or damaged, they shall be immediately changed. Carefully
read the meaning of the safety signals, and memorize it:
3.7 INTENDED USE
The vehicle lifts described in this manual are designed and manufactured for lifting vehicles for inspection,
maintenance and/or repair purposes only.
The vehicle lift should be used only for lifting vehicles within the load capacity limits given in the IDENTIFICATION
PLATE and in the paragraph 1.3 "LOAD DISTRIBUTION"
CAR
EFULLY READ THE INSTRUCTIONS GIVEN IN THIS MANUAL BEFORE USING THE LIFT