9
3. NAMES AND OPERATION OF PARTS
Aligns the width of the paper.
Aligns the length of the paper.
Holds the paper in conveyance. Can be removed to remove jammed paper.
Belt to convey the paper.
Roller to drive the conveyance belt and ball unit.
Conveys the paper from the saddle-stapling stopper to the folding stopper.
Staples the paper.
Bends the stapler pin flat.
Stopper used for side-stapling or corner-stapling the paper.
Stopper used for saddle-stapling the paper.
Stopper which decides the folding position.
Roller for folding the paper.
Used for adjusting the clearance between the folding rollers.
Holds the paper. Can be opened and closed to remove jammed paper.
Counts the number of times stapled.
No. Name Operation
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
Side jogger
Back jogger
Conveyance roller unit
Conveyance belt
Conveyance roller
Ball unit
Stapler head
Clincher
Side-stapling stopper
Saddle-stapling stopper
Folding stopper
Folding roller
Clearance adjusting
lever
Guide plate
Total counter
To Next Page
Loading...
Need help?
General
