10
4. CHECK THIS BEFORE USE
4-1. What is Stapling, Stapling & Folding, Folding?
Stapling
Side-staples or corner-
staples the paper with
staplers.
Stapling & folding
Saddle-staples the paper
with staplers and folds it
along the center line.
Folding
Center-folds the paper
without stapling.
Side-stapling Corner-stapling
Staples
4-2. When Turning ON the Power
Press the “I” of the main power switch, and
then press the “I” of the power switch at the top
of the unit to turn ON the power. The power
ON indicator on the control panel lights up.
If paper remains in the unit, remove the paper
first before turning ON the power.
Main power switch
Switch for turning on power supply to the unit. Normally, leave ON (set to “I”).
Normally use the power switch at the top of the unit to turn ON and OFF the power.
NOTE : To turn OFF the main power, turn off the power using the power switch at the top of the unit before turning
OFF the main power switch.
Power switch
Switch for turning ON and OFF the power of the unit.
(If the downstream unit has a remote function, pressing this switch will also turn ON and OFF the power of the downstream unit
at the same time.)
Remote function
This function is used for turning ON/OFF the power of each unit using just one power switch when linking several processing
units.
Do not touch the power switch with
wet hands. Otherwise electric
hazards may occur.
WARNING
!
Power switch
Main power switch
To Next Page
Loading...
Need help?
General
